1、Direct-acting electromagnetic directional stop valve
2、the mounting surface is din 24 type 340a ISO 4401 and CETOP-RP 121H
3、No leakage
4、Flexible switching is ensured under high voltage condition
5、When replacing the coil, there is no need to open the pressure-resistant cavity.
6、the electromagnet coil can rotate by 90.
7、optional manual emergency operation
| Installation position | Optional | ||
| Environment temperature | ℃ | -30 to +50 (NBR seal) | |
| -20 to +50 (FKM seal) | |||
| Weight | Two tee Solenoidic directional valve | Kg | 2.6 |
| Two four-way Solenoidic directional valve | Kg | 3.9 | |
| Max operation pressure | bar | 350 | |
| Max flow | L/min | 40 | |
| Hydraulic fluid | Mineral oil suitable for NBR and FKM seal | ||
| Phosphate ester for FKM seal | |||
| Fluid temperature range | ℃ | -30 to +80 (NBR seal) | |
| -20 to +80 (FKM seal) | |||
| Viscosity range | mm2/s | 2.8 to 500 | |
| Degree of contamination | Maximum permissible degree of fluid contamination:Class 9. NAS 1638 or 20/18/15, ISO4406 | ||
Electrical data
| Voltage type | DC | AC+ rectifier | |||||||||||
| Voltage version | V | 12, 24, 110, 205, 220 | 110,220(only possible via Z5 rectifier) | ||||||||||
| Permissible voltage(deviation) | % | +10～-15 | |||||||||||
| Input power | W | 30 | |||||||||||
| Continuous power-on time | Continuous | ||||||||||||
| Switching time to ISO 6403 | |||||||||||||
| Pressure bar | Flow L/min | DC solenoid | AC + rectifier | ||||||||||
| On/ms (without oil tank pressure) | Off/ms | On/ms (without oil tank pressure) | Off/ms | ||||||||||
| UK | CK | D | Y | UK, CK | D, Y | UK | CK | D | Y | UK, CK | D, Y | ||
| 70 | 40 | 40 | 30 | 40 | 35 | 10 | 10 | 35 | 30 | 40 | 35 | 40 | 40 |
| 140 | 40 | 40 | 30 | 40 | 35 | 10 | 10 | 40 | 30 | 40 | 35 | 40 | 40 |
| 210 | 40 | 45 | 35 | 45 | 35 | 10 | 10 | 45 | 35 | 45 | 35 | 40 | 40 |
| 280 | 40 | 45 | 35 | 45 | 35 | 10 | 10 | 45 | 35 | 45 | 35 | 40 | 40 |
| 315 | 40 | 50 | 35 | 50 | 35 | 10 | 10 | 50 | 40 | 50 | 35 | 40 | 40 |
| 350 | 40 | 50 | 45 | 50 | 45 | 10 | 10 | 50 | 45 | 50 | 45 | 40 | 40 |
| Note: The switching types relate to a flow of P to A and A to T.With reversed flows deviations are possible. | |||||||||||||
| Switching frequency | Cycles/h | to 15000 | |||||||||||
| IP rating as per DIN 40050 | IP65 | ||||||||||||
| Max coil temperature | ℃ | +150 | |||||||||||
Note: for electrical connection, protective wire (PE ) shall be earthed as required.
Subplate directional spool valve-SEW 6 series