1/2″ Plug with beaded ISO7/1 threading

Come to buy the cheapest 1/2″ Plug with beaded ISO7/1 threading ? Tianjin Decho Company can provide you 1 week short delivery 1/2″ Plug with beaded ISO7/1 threading products, with hot dip galvanizing , widely used in Cameroon, Burundi, Egypt ,Qatar,Algeria, Angola, Botswana and other South Africa countries . Buy Now.

The 1/2″ Plug with beaded ISO7/1 threading is a kind of fitting with square male threading and convex plate, which is in malleable iron,it is used to block off the unnecessary outlet.

All the fittings should conform to the maximum allowable operating pressure and temperature range in the following table. The pressure figure between 120℃ to 300 ℃ should be defined in linear insertion method. The normal operating temperature should be no lower than -20℃. When fittings are used out of the specified pressure and temperature range, the manufacturer shall be consulted.

More Detail

Inquiry Form

Description

1/2″ Plug with beaded ISO7/1 threading

1. Description of Products

The beaded plug is a kind of fitting with square male threading and convex plate, which is in malleable iron,it is used to block off the unnecessary outlet.

Dimensions:

1/2” (DN15)

Design Standard:

ENTERPRISE STANDARD

Connection Standard:

ISO 7/1

Working Pressure:

PN16

Application:

The plug is suitable for medium and low pressure pipeline systems, whose nominal pressure is not exceeding 2.5 MPa and working temperature range is between-20 °C and 120 °C. It is mainly applied in water, oil, air, gas, steam system, etc.

Material of Matching Products:

Q195, EN10255

Surface Treatment:

□Black
□Hot-dip galvanizing
□Hot-dip galvanizing+ Electroplated zinc
□Epoxy power painting
□Electroplated zinc
□Others would be available upon clients’ detailed request

2. DIMENSIONS

3. Performance

1) All fittings shall comply with the maximum permissible working pressure and temperature range given in the table. The pressure value between 120 °C and 300 °C is determined by linear interpolation. The normal temperature of the pipe is not lower than -20 °C. When used outside the specified pressure and temperature range, it should be negotiated with the manufacturer

2) The inside of the pipe fittings shall be able to withstand an air pressure of not less than 0.5 MPa, and the pipe fittings shall be completely immersed in the water tank for visual inspection without

Temperature Range ℃	Max Working Pressure MPa
-20-120	2.5
120-300	Interpolated value
300	2