Plan to buy affordable reducing cross? Decho online can offer you reducing cross, black one or galvanized one . The reducing cross are produced in comply with BS standard , widely used in Dubai , Iraq, Israel ,Oman, Saudi Arabic, Kuwait, and other middle east countries . We will be your best supplier on malleable iron pipe fittings products
The reducing cross is one kind of malleable iron pipe fittings, which can connect four pipe joints of different nominal diameters to make the pipe can be turned 180 degree. It is mainly applied in water, oil, air, gas, steam system, etc.
The reducing cross is one kind of malleable iron pipe fittings, which can connect four pipe joints of different nominal diameters to make the pipe can be turned 180 degree.
Dimensions:
11/4”X1” (DN32X25)-3”X2” (DN80X50)
Design Standard:
ENTERPRISE STANDARD
Connection Standard:
ISO 7/1, GB/T 7306.2
Working Pressure:
PN16
Application:
The reducing cross is suitable for medium and low pressure pipeline systems, whose nominal pressure is not exceeding 2.5 MPa and working temperature range is between -20 °C and 120 °C. It is mainly applied in water, oil, air, gas, steam system, etc.
Material of Matching Products:
Q195, EN10255
Surface Treatment:
□Black
□Hot-dip galvanizing
□Hot-dip galvanizing+ Electroplated zinc
□Epoxy power painting
□Electroplated zinc
□Others would be available upon clients’ detailed request
2. DIMENSIONS
3. Performance
1) All fittings shall comply with the maximum permissible working pressure and temperature range given in the table. The pressure value between 120 °C and 300 °C is determined by linear interpolation. The normal temperature of the pipe is not lower than -20 °C. When used outside the specified pressure and temperature range, it should be negotiated with the manufacturer
2) The inside of the pipe fittings shall be able to withstand an air pressure of not less than 0.5 MPa, and the pipe fittings shall be completely immersed in the water tank for visual inspection without
